Installing IKEA Wall Anchor : IKEA Wall Anchor Design

Attach a masonry bit on a drill hammer or hammer drill. It is important that the drill bit to match the diameter of the IKEA wall anchor you plan to use. Place the wall anchor to the end of the drill bit and mark the depth of the wall anchor in the drill bit with tape. This will ensure that you drill deep enough into the wall, but not more than necessary.

Keep masonry piece perpendicular to the wall and pull the trigger. Hold the drill firmly and apply sufficient inward pressure on the back of the drill until you reach the desired depth. Suck the powder within the hole with a wet / dry vacuum. Fill the hole with 100 percent silicone caulk and then slide the IKEA wall anchor in the hole. The seal will fill the hole and protect it from moisture, but will still allow you to remove the screw from the anchor if necessary. The anchor fits tightly if you used the right masonry drill bit and kept straight. If necessary, tap the anchor into the wall with a hammer.

This digital photography of IKEA Wall Anchor Design has dimension 1280 x 720 pixels, you can download and get the IKEA Wall Anchor Design digital photography by right click on the right click to get the large version.

Here is imperative science on Best IKEA Wall Anchor. We have the excellent substance for Best IKEA Wall Anchor. Check it out for yourself! You can get IKEA Wall Anchor Design guide and view the latest Installing IKEA Wall Anchor in here.

Back to Installing IKEA Wall Anchor

Comments are closed.