Installing IKEA Wall Anchor : IKEA Wall Anchor Install

Attach a masonry bit on a drill hammer or hammer drill. It is important that the drill bit to match the diameter of the IKEA wall anchor you plan to use. Place the wall anchor to the end of the drill bit and mark the depth of the wall anchor in the drill bit with tape. This will ensure that you drill deep enough into the wall, but not more than necessary.

Keep masonry piece perpendicular to the wall and pull the trigger. Hold the drill firmly and apply sufficient inward pressure on the back of the drill until you reach the desired depth. Suck the powder within the hole with a wet / dry vacuum. Fill the hole with 100 percent silicone caulk and then slide the IKEA wall anchor in the hole. The seal will fill the hole and protect it from moisture, but will still allow you to remove the screw from the anchor if necessary. The anchor fits tightly if you used the right masonry drill bit and kept straight. If necessary, tap the anchor into the wall with a hammer.

This picture of IKEA Wall Anchor Install has dimension 1280 x 720 pixels, you can download and gain the IKEA Wall Anchor Install picture by right click on the clicking the right mouse to get the large version.

Here is main instruction on IKEA Wall Anchor Ideas. We have the world class sources for IKEA Wall Anchor Ideas. Check it out for yourself! You can discover IKEA Wall Anchor Install guide and look the latest Installing IKEA Wall Anchor in here.

Back to Installing IKEA Wall Anchor

Comments are closed.